*Company Home Page    Click Here

As Industrial CT Scanning is new to most of our clients, we always ensure you are properly educated, comfortable with our inspection process, and most importantly satisfied with the results!

Engine Piston 3D x-ray
Medical device 3d x-ray
Bottle stopper Region of Interest 3D x-ray

our process

Begin by contacting our experienced staff to discuss your projects 3D internal part inspection service requirements.  After the initial review, a custom feasibility study is performed to ensure we meet your inspection requirements while providing the most cost effective solution.  By utilizing multiple CT scanning systems of varying energies and configurations, we are always able to pair each project with the proper CT scanning system for the job.  This allows us to offer the best results in the industry at an extremely competitive price.  Once your parts arrive at our secure facility, they are logged into our system and scheduled for Industrial CT scanning.  After scanning is done, we then begin analyzing the data for one or more of the pre-selected analysis listed below.  Upon completing the analysis, a web conference is hosted by one of our experienced analysts to ensure we are meeting the project requirements and you're able to see the results you were looking for. During that same web conference, we'll show you how to use the supplied freeware viewing software.  This viewing software allows you to have access to the data at any time and review the results even further with your team.  Finally, results and parts are then delivered back to you, along with a copy of the freeware software.



Types of analysis we provide using Industrial CT Scanning...


ct scanning void analysis

Void/Inclusion Analysis

An analysis performed by CT scanning one part and evaluating internal porosity or inclusions within a part.

More information

back to top


ct scanning part to cad comparison

Part to CAD Comparison

An analysis performed by CT scanning one part and comparing it to a supplied CAD model

More information

back to top


ct scanning part to part comparison

Part to Part Comparison

An analysis performed by CT scanning two parts and comparing both CT datasets to each other.

More information

back to top


micro ct scanning assembly defect

Assembly/Defect Analysis

An analysis performed by CT scanning one part and taking virtual cross sectional slices through a CT dataset 

More information

back to top


ct scanning reverse engineering

Reverse Engineering

Development of a CAD file with internal and external geometry from a CT dataset 

More information

back to top


ct scanning wall thickness analysis

Wall Thickness Analysis

An analysis performed by CT scanning one part and evaluating inconsistencies of wall thickness within a part

More information

back to top


ct scanning fiber analysis

Fiber Analysis

An analysis performed by CT scanning one part and evaluating single or multiple fibers within a part

More information

back to top


ct scanning first article inspection

First Article Inspection

Development of a measurement plan from a GD&T part print to automatically calculate multiple dimensions simultaneously from a CT dataset

More information

back to top


ct scanning part p-201

P-201 Analysis

An analysis performed by CT scanning one part, evaluating porosity in a predetermined cross sectional slice within a CT dataset, and comparing it to a specified maximum percentage of porosity for that area

More information

back to top


* As the only specialized lab in North America solely focused on providing Industrial CT Scanning services, our primary goal is to provide results.  However, we understand the technology may be something new and we are committed to ensuring your are properly educated before you begin.  For this reason our extensive FAQ section is listed below for your reference.


Frequently Asked Questions


  • What is an x-ray?

    A digital x-Ray is performed by energizing photons through a source and capturing the results on a flat panel or line detector array after they pass through an object.  Higher density objects are shown lighter and while lower density objects are shown darker.

    X-Ray sources come in a variety of configurations and power ranges.  When an x-ray is taken, insufficient power results in photons bouncing off the parts surface and too much power results in x-rays passing through a part too easy.  Both instances can cause faulty errors in the results or inaccurate data.

    Digital X-Ray resolution is derived by the pixel pitch on the digital detector.  Magnification can also be used to increase the recorded resolution of an x-ray.  An easy analogy of both pixel pitch and magnification are shown in the picture to the right.

  • What is Industrial CT Scanning?

    Computed tomography is the process of taking several hundred to several thousand 2D x-ray images over 360 degrees and reconstructing the images into 3D.  The video to the right illustrates how the most common type of Industrial CT Scanning works in industry today, called Cone Beam CT.

    The picture below the video shows how the second most common type of industrial CT scanning systems operate called fan/line beam CT.

  • What are the benefits of Industrial CT Scanning?

    • Inspection and analysis costs from first article to production are significantly reduced

    • Design requirements for both internal and external components are validated quickly and accurately

    • Development costs are reduced in creating the first CAD model

    • Delicate and fragile parts can be CT scanned in a Free State environment without fixtures or applying external forces

    • Product quality is improved to reduce the risk of recalls

    • Internal accuracy can be guaranteed by using proper CT scanning systems and CT scanning techniques

    • Internal complex part features can be precisely measured without destructive testing

  • Most Common Uses for Industrial CT Scanning

    • Preproduction Inspection

    • Failure Analysis

    • Production Inspection for high valued parts

    • Lot inspection for quarantined or suspect parts

  • Capabilities

    What types of Industrial CT Scanning machines does JG&A Metrology Center use?

    The company utilizes multiple cone beam, line/fan beam, and planar CT systems capable of generating energies from 10kEv to 3.5 MEv.

    What are our size limitations?
    With our capabilities we can x-ray most parts ranging from micro parts as small as .5mm in length to parts as large as 660mm in diameter x 1m in length.

    How many parts can we inspect?
    We are pleased to work with clients that only have one part all the way up to clients who require several thousand parts needing inspection.

  • Frequently Asked Questions

    Are Industrial CT scanning systems portable?
    No. Industrial CT systems are not portable due to their size and weight.

    What is the accuracy of the CT scan results?
    The scan accuracy varies widely from the machine being used, type of detector, resolution of the detector, type of part, and size of part.  However, as a guideline, accuracy’s range between 1 micron to 150 micron.  For projects requiring accuracies tighter than 5 micron, very detailed scan calibration is required.  During the quoting phase, scan accuracy can be provided to the customer prior to any ct scanning.

    What is the resolution of the CT scan?
    The scan resolution varies widely from the machine being used, resolution of the detector, spot size of the source, and size of scanning window.  Howeveras a guideline, scan resolution ranges between 1 micron to 150 micron.  During the quoting phase, scan resolution can be provided to the customer prior to any scanning.

    Are our systems calibrated?
    Yes.  Every system is calibrated on a regular basis for mechanical movement.  Due to the number of processing parameters associated with Industrial CT, every scan is also calibrated to ensure the highest accuracy for every project.

    How are the parts fixtured during the CT scan?
    Since parts are scanned in a Free State environment and reference planes are not needed for the scan itself, most fixturing is performed with Styrofoam. For multiple parts requiring a highly repeatable setup, robust fixtures are developed on a case by case basis.

    Can multiple parts be CT scanned at the same time?
    Yes. Depending on the customers objective and the resolution required to effectively image out the results, JG&A always attempts to scan multiple parts at once to reduce the overall cost of the project.

    Does the part heat up?

    Does the scan leave residual radiation in the part?

    Can you CT scan a part while it’s in motion?
    No. Every part within the scan must remain static or non-moving for the entire length of the scan.

    Can you CT scan a part hot or cold?
    Yes.  Custom scanning processes and fixtures can be developed between the customer and our analysts to obtain a desired environmental temperature.

    How long does a CT scan take?
    The average scan time for our cone beam systems can typically take 45 minutes and the average scan time for line beam system typically ranges from 2
    to 20 hours.

    In what file format are the initial results captured?

    How large are the CT scan dataset files?
    CT datasets typically range from 500MB to 80GB in size

    How are the results provided to the customer?
    For all analysis except for reverse engineering, results are supplied to the customer using the provided freeware software.  For reverse engineering, results are provided in the following formats, click here

  • Pricing

    Every projects objective is highly unique and requires a specific scan resolution matched with the desired type of analysis.  Because we attempt to pair the proper CT system with every project to ensure the most cost effective solution and best results possible, each project is quoted separately.
    To obtain a free quote, please contact us today!





Contact us to discuss any questions you have before requesting a quote. Our experienced staff will get you the answers you need today!

Send Us An Email


We offer a 20-30 minute webinar at no charge. Learn exactly what an Industrial CT scan is and how it can specifically work for your project.

request a webinar


Let us know your project’s objective, type of material, size of part, and quantity of parts to inspect. Include pictures and prints if possible.

request for quote